Home/Blog/Signs your solar panels need repair

Signs your solar panels need repair

Published: November 2026•5 min read

Four things usually tell you a solar system needs repair: output that stays low, a fault code or warning light on the inverter, damage you can see after a storm, and a burning smell or a breaker that keeps tripping. You can spot most of these from the ground. The repair itself is a job for a professional, and this guide covers what to look for, what you can safely check, and what happens when we come out.

Blue Flag Solar repairs and maintains existing solar systems for homeowners and businesses across New Jersey, no matter who installed them.

The short version

  • One bad day means nothing. Output that stays low across several sunny days is the signal.
  • Look, write it down, and call. Check your monitoring app and take photos.
  • Stay off the roof. Do not open the inverter or touch connectors or wiring.
  • Read your warranty before you approve any repair, including who pays for labor.

Warning signs your system needs attention

Output that stays low

Open your monitoring app and compare this month with the same month in earlier years. A slow slide over weeks or months often points to an aging inverter or trouble with a few panels. A sudden drop usually means a failed part, a tripped breaker, or a wiring fault.

Damage you can see from the ground

You do not need a ladder. Use binoculars or your phone’s zoom and look for cracked glass, dark streaks on the panel faces, panels that have shifted or lifted, hanging cables, and debris after a storm. Hail can crack cells in ways you cannot see, and the only clue is lost production.

Inverter codes and warning lights

The inverter display and your monitoring app work like an error log. Watch for fault codes, an inverter that keeps switching on and off, zero output on a sunny day, and red or amber lights. Photograph the display and write down the exact code before you call. We can start diagnosing before we arrive, and the photo helps if a warranty claim follows. More on this is on our solar inverter repair page.

What you can safely check yourself

Keep it to looking and writing things down.

  • Note whether the whole system is down or just part of it.
  • Write down any fault code and the date the drop began.
  • Take screenshots of your monitoring app.
  • Note recent storms, and whether the problem comes and goes.
  • Look at the panels from the ground.
  • Check whether a labeled solar breaker has tripped. Do not keep resetting it.

Please do not climb onto the roof, touch connectors, open the inverter, or handle wiring. Solar circuits stay live whenever light hits the panels, even with the grid disconnected.

When to stop and call right away

A burning smell, crackling, smoke, exposed wires, water near the inverter, or a breaker that keeps tripping all mean the same thing: keep everyone away and call a licensed solar professional. If there is smoke or fire, call 911. Treat this as a safety problem and leave the troubleshooting for later.

What a service visit involves

A service call is a diagnostic visit. A technician looks over the panels, racking, wiring, inverter and monitoring data to find the actual fault, then explains your options. Repair and maintenance are separate services, so you can book either one on its own.

Here is what that looks like with us:

  • We keep some common parts on hand and handle manufacturer warranty claims and RMAs for systems from all major manufacturers.
  • Our technicians are SolarEdge and Enphase certified, and we service systems from all major manufacturers. Our field lead is OSHA 30 certified.
  • If a repair needs service panel work or utility reconnection, we bring in licensed partner electricians.
  • Commercial jobs get a written service report. Residential customers can ask for one.
  • Most service calls can be scheduled within 3 to 5 business days, and fully offline systems and storm damage go first.

If your installer has closed, you are not stuck. We service systems we did not install. Commercial owners with rooftop or ground-mount systems can read about commercial solar repair.

Warranties and repairs

Up to three kinds of coverage can apply, and each pays for something different. The manufacturer’s product warranty covers defective equipment, usually the part and not always the labor. The performance warranty covers output that falls below a guaranteed level. The installer’s workmanship warranty covers installation mistakes such as loose connections.

Before you approve a repair, read your warranty documents and get it in writing which one applies and what it pays for. People often authorize the work first and learn afterward that the labor was not covered.

Questions to ask any repair company

  • Can I see your license and insurance documents? Verify them with the issuer yourself.
  • Are you authorized to work on my brand of equipment?
  • Who will do the electrical work?
  • Have you repaired existing systems, or only installed new ones?

If a company cannot answer these, keep looking.

The next step

Check the monitoring app, take a careful look from the ground, and write everything down. Then call. If you come prepared, you get a faster diagnosis and a stronger warranty claim.

Frequently asked questions

Can I fix solar panel problems myself to save money?

No. Stick to safe checks from the ground, like the monitoring app, binoculars, and noting a tripped breaker. Stay off the roof and away from the wiring.

My installer went out of business. Can someone else handle warranty claims?

Often, yes. A qualified service company can usually work with the manufacturer directly. We handle warranty claims and RMAs for systems from all major manufacturers.

Does homeowners insurance cover storm or hail damage to panels?

It often does, but it depends on your policy. Storm damage usually goes through insurance, not the manufacturer’s warranty. Photograph the damage and call your insurer.

Need a technician?

Book a diagnostic visit, or send details first and we will follow up.